Kärcher TB 36, Original Instructions Manual

     - 

6

1 Menu item
2 Parameter



Select the menu item with the buttons 
LEFT and RIGHT.



Press OK to open the parameter group.



Use the LEFT and RIGHT buttons to 
select the parameter you want to set.



Press the OK button.
The selectable variable blinks.



Use the LEFT and RIGHT buttons to 
select the variable value.
Press and hold the button for a swift 
change of the variable.



Press the OK button to save the select-
ed value.
or
Press ESC to abort the change.



Press the OK button.
The selectable variable blinks.



Use the LEFT and RIGHT buttons to 
select the variable value.



Press OK briefly to save the value and 
to jump to the next variable.



Press the OK button for more than 1 
second to save set values.
or
Press ESC to abort the change.



Press the ESC ro return to the next 
higher menu.

Here you can select the gantry speed for 
the individual program sections.

FW emergency mode No:
If the processed water supply is used up, 
the running wash is continued with fresh 
water. After the wash is completed, the sys-
tem switches to a non-operational state.
FW emergency mode Yes:
If the processed water supply is used up, 
the washing operation is continued with 
fresh water. The system remains ready for 
operation, a message will be displayed.

Setting date, time and summer/winter time 
change

Auto summer / winter time = YES:

Automatic change active. Summer time 
(daylight saving time) begins on the last 
sunday in March at 2:00 o'clock. Winter 
time (normal time) begins on the last sun-
day in October at 3:00 o'clock.
Auto summer / winter time = NO:
No automatic time change.

The plant is open during the operating time. 
The plant is locked outside the operating 
time.

24 hours open: 

Set beginning and end of 

the operating time to the same value.

24 hours closed: 

Set the end of the oper-

ating time to an earlier value than the be-
ginning of the operating time

Variable public holidays are on different 
days every year. They must newly be set 
every year.
On the set public holidays the operating 
time selected for public holidays applies. 

Note

Set the date to 00.00.00 for unused public 
holidays.

Fixed public holidays are on the same day 
every year.
On the set public holidays the operating 
time selected for public holidays applies. 

Select the parameter you want to set

Set the parameter with a variable

Setting a parameter with several varia-
bles

Exiting the menu

Speed selection

Program section

Setting range

Foam

30%...150%

Intensiv

30%...150%

HD-HD roof

30%...150%

HP side c.

30%...150%

Car

30%...120%

Transp.

30%...120%

Bus

30%...120%

Truck

30%...120%

Tanker

30%...120%

Rinsing

30%...150%

Setting selection

Date / time selection

Operating time selection

Selection of variable public holidays 

Selection of fixed public holidays 

8

EN