English
31
1
Storing the high-pressure hose
2
High-pressure gun with spray lance
3
Holder with rubber latch
4
Intake
10.Fit the high-pressure gun with spray lance into the
mount and holder and secure with the rubber retainer.
11.Open the right-hand door and place the high-pressure
hose in the storage compartment.
15
Storage
몇
CAUTION
Risk of injury and damage
Be aware of the weight of the device during storage.
16
Care and maintenance
16.1 Maintenance intervals
Note
In order to preserve warranty claims, all servicing and
maintenance work during the warranty period has to be
performed by an authorised Kärcher Customer Service, in
accordance with the inspection check list.
16.2 Check/clean the water filter
1
Casing
2
Water filter
3
Seal
1. Open the left-hand door.
2. Visually check the water filter externally for soiling.
3. For removing the water filter:
a Close off the water inlet.
b Allow the pump to run briefly until the housing is emp-
ty.
c Unscrew and remove the casing.
d Check the seal and replace if necessary.
4. Clean the water filter and replace if necessary.
Lubricate the housing seal and sealing surface of the
water filter with silicone grease.
5. Install in the reverse order.
6. Open the water inlet.
16.3 Refilling oil in the high-pressure pump
몇
CAUTION
Risk of burns!
Allow the high-pressure pump to cool down before refilling
with oil.
ATTENTION
Check the oil level when the high-pressure pump has
cooled down.
Note
The correct oil level is in the middle of the sight glass.
1
Oil filler opening
2
Sight glass
Time & date
Activity
By whom
Daily
Check the oil level in the
high-pressure pump, refill
with oil if necessary
Operator
Daily
General visual inspection
of the WRS 200
Operator
Daily
Check the water filter,
clean if necessary
Operator
Daily
Check the filling level in the
system care container and
fill with RM 110 if neces-
sary
Operator
Weekly
Check the fastening
screws for tight seating
Operator
After the first
50 operating
hours
Replace the oil in the high-
pressure pump
Customer Ser-
vice
Every 50 oper-
ating hours or
weekly
Check the battery, see the
information on the battery
Operator
Every 600 op-
erating hours
or annually
Replace the oil in the high-
pressure pump
Customer Ser-
vice
