Kärcher WV 50 Plus, Instruction Manual

– 5

Illustration 



Attach the suction nozzle to the separa-
tor until it snaps in place audibly

Note:

 Please note that after first activation 

of the spray head transport lock will loosen. 

Illustration 



Remove the spray head from the spray 
bottle.



Attach the wiper attachment to the 
spray head. 



Secure the wiper attachment and the 
spray head with the fixating ring.

Illustration 



Attach the wiper pad to the wiper at-
tachment and secure with Velcro.

Illustration 



Pour detergent into the spray bottle. 



Close the bottle.

Illustration 



Insert the charger delivered with the ap-
pliance into a proper socket.



Insert the charging cable plug to the 
back of the appliance.

Note

: During the charging process, the 

charge/operating display blinks. Once 
the battery is fully charged, it will be per-
manently illuminated.

Illustration 



Press the spray lever on the bottle to 
apply the detergent and spray the sur-
face evenly; after that, loosen the dirt 
using the wiping pad.

Note

: Rinse pad under running water if 

needed!

Illustration 



Switch the appliance on, the charge/op-
erations display will illuminate.

Important:

 Prior to use, ensure that the 

squeegees are free of soiling.



Pull the appliance from the top to the 
bottom to vacuum up the detergent.

Note

: Hard to reach areas can be vacu-

umed vertically or horizontally (limited 
areas).

Notes:

If the battery is low, the charging / power in-
dicator starts flashing slowly and the appli-
ance switches off after a certain time. If this 
is the case, charge the battery.
The appliance can be switched off while the 
spray bottle is in use. This significantly in-
creases the operating time per battery 
charge.



Apply the detergent as usual according 
to manufacturer's instructions and loos-
en the dirt.



Further procedure same as the "Clean-
ing with spray bottle and wiper attach-
ment", see illustration 

.

Illustration 



Switch off the appliance and set it down 
on the pedestal (parking position).

Once the max. fill level (mark) of the waste 
water tank is reached, please empty the 
tank. 
Illustration 



Turn off the appliance. 

Illustration 



Pull off the lock of the waste water tank 
and empty the tank.



Close the closure of the waste water 
tank.

Assemble the appliance

Attach the spray bottle and wiper 

attachment and fill it with detergent

Attach the wiping attachment

Fill the spray bottle

Charge the battery

Start working

Cleaning with spray bottle and wiper 
attachment

Cleaning without the spray bottle

Interrupting the work

Emptying the reservoir during 

operation

12

EN