7
/
Lifting and Mounting
1.
Mark where the cabinet should stand.
2.
The Kardia unit must stand
level. The base can be
adjusted with rubber shims
placed under each corner
where the unit shall stand.
The rubber shims are
attached to the outside of the
package for easy access during assembly (80x80mm
rubber shims, 4x2mm green, 4x3mm yellow and 4x4mm
red are included).
These can be combined to adjust each corner from 2 - 9mm.
Use a laser to check that there is a max 1mm height difference
between all 4 corners.
