8
9
4.1. Inserting the batteries
a) Insert the batteries (4 x size AAA 1.5V), thereby observing the indicated polarity.
b) If the battery warning icon appears in the display, the batteries remain 20% power to warn user the batteries will be run out .
c) If the battery warning icon appears in the display, the batteries are empty and must be replaced by new ones
Attention!
4.2. Reading the set date
Please press the TIME button and the date will be shown in the display.
4.3. User selection and setting the time / date
User selection:
This advanced blood pressure monitor allows you to track blood pressure readings for 2 individuals independently
a) Before measurement, make sure you set the unit for the intended user. The unit can track results for 2 individuals. (User 1, User 2)
b) Press the TIME button for at least 3 seconds. The display now indicates the set user, during which the set user blink. To confirm,
press ON/OFF button .
c) Click the MEMORY button to select User
d) We suggest the first person to take their pressure to be User 1.
3. The various components of the blood-pressure monitor
4. Putting the blood-pressure monitor into operation
•
After the battery warning icon appears, the device is blocked until the batteries have been replaced.
•
Please use «AAA» Long-Life or Alkaline 1.5V Batteries. The use of 1.2V Accumulators is not recommended.
•
If the blood-pressure monitor is left unused for long periods, please remove the batteries from the device.
