Karel DS200 Technical Reference And Installation Manual Download

Page: 213 / 222

DS Series PBX Technical Reference And Installation Guide

203

To power off the system:

1) Run “stop” command from the shell screen of the passive PCU.

2) Turn off the passive PCU after the stop command is entered and interpreted. In order

to turn off the PC “shutdown –hP now” command can be used.

3) Run “stop” command from the shell screen of the active PCU. Since the PCU is in

active mode a warning message is displayed to remind you to power off the passive
PCU first. The user must enter “y” or “Y” for the question “your choice?:”

4) Now the system must be stopped position (the system is not functional at all).

5) In this position, it is recommended to power off all the towers of the system (this is

recommended to rest all the hardware interactions of the PCUs).

To power on the system:

1) Run “start” command from the shell screen of the passive PCU.

2) Wait until dial tone is heard from any of the phones connected to the system.

If no dial tone is received within one minute the following points must be checked:

a) When “ps-ef” command is entered in the shell screen, the active processes must

be listed (i.e. n_master.rt, timer.rt, etc.). It is not necessary to check all the
processes. If n-master.rt, nks.rt and dsinit is listed then the rest can be assumed
to be running.

b) When “dslog” command is entered from the shell screed the following log info

must be seen:

Jul 16 10:53:53 ds300s KAREL[16697]: START:DS200L system is starting
Jul 16 10:53:53 ds300s KAREL[16698]: DSINIT: ***********************************
Jul 16 10:53:53 ds300s KAREL[16698]: DSINIT: ******* KAREL DS200L SYSTEM *******
Jul 16 10:53:53 ds300s KAREL[16698]: DSINIT: ***********************************
Jul 16 10:53:53 ds300s KAREL[16698]: DSINIT: Version: AAG
Jul 16 10:53:53 ds300s KAREL[16698]: DSINIT: Build : Mar 2 2009 - 17:48:54
Jul 16 10:53:53 ds300s KAREL[16698]: DSINIT: Checking multiple instance
Jul 16 10:53:53 ds300s KAREL[16698]: DSINIT: Getting file system statistics (/karel)
Jul 16 10:53:53 ds300s KAREL[16698]: DSINIT:

Type: EF53

Jul 16 10:53:53 ds300s KAREL[16698]: DSINIT:  Bsize: 4096 - Blocks: 4644543 - Bfree:
2979456
Jul 16 10:53:53 ds300s KAREL[16698]: DSINIT:  Files: 2359296 - Ffree: 2355085
Jul 16 10:53:53 ds300s KAREL[16698]: DSINIT:  Free percentage: %64 (Panic level:
%40)
Jul 16 10:53:53 ds300s KAREL[16698]: DSINIT: Checking filesystem
Jul 16 10:53:54 ds300s KAREL[16701]: DSINIT: Version = zr_acb_38
Jul 16 10:53:54 ds300s KAREL[16701]: DSINIT: Buddy = none
Jul 16 10:53:54 ds300s KAREL[16701]: DSINIT: Snmp = remote
Jul 16 10:53:54 ds300s KAREL[16701]: DSINIT: Forcing cold startup
Jul 16 10:53:54 ds300s KAREL[16701]: DSINIT: NKS started (PID:16703)
Jul 16 10:53:54 ds300s KAREL[16701]: DSINIT: MASTER started (PID:16704)
Jul 16 10:53:54 ds300s KAREL[16703]: NKS: Version: AAE (RURAL)
Jul 16 10:53:54 ds300s KAREL[16703]: NKS: Build  : Apr 14 2009 - 17:37:28
Jul 16 10:53:54 ds300s KAREL[16703]: NKS: Host ip: 192.168.169.193
Jul 16 10:53:54 ds300s KAREL[16703]: NKS: Spinning for mode
Jul 16 10:53:54 ds300s KAREL[16713]: BUDDY: Running in standalone mode
Jul 16 10:53:54 ds300s KAREL[16703]: NKS: Running in active mode
Jul 16 10:53:54 ds300s KAREL[16710]: DS3SVR: NKS receiver thread starting
(TID:16715)
Jul 16 10:53:54 ds300s KAREL[16710]: DS3SVR: NKS:accept succeed (127.0.0.1:35765)
Jul 16 10:53:54 ds300s KAREL[16709]: PBXCOMM: TX:transmitter loop starting
(TID:16709)