11
repeated for the door opener function as well; codes (*151) or (*29) is entered, then
they are confirmed by the “Accept” key and the operation is thus accomplished. One
reverts to the Key Settings submenu screen by pressing the “Up” key. Then the user
can talk over the door phone or open a door, each by pressing a single key that s/he
has previously chosen.
NOTE:
•
Here the code required for “Door Phone Conversation” is 110, however, capacities
smaller than 6/18 require the code 10.
•
On the other hand, the code required for “Door Opener” is 151, however, for
capacities smaller than 6/18, the required code becomes 29.
By Automatic Programming Menu:
In FT telephone sets, possibility of assigning different functions to the entire keys
simultaneously is provided via the Auto Setting option under the Key Settings menu.
This feature will be explained in detail later in the section “Auto Settings”. Via the
automatic programming, about 20 functions can be programmed for the FT telephone
sets at the same time. These functions can be changed later one by one, as already
explained in the sections above, or they can be cleared through the “Clear All?” option
in the same menu.
