background image

EN

2. SAFETY 

2.1.General 

Please  read  the  instructions,  in  particular,  the 
“Safety”  section,  before  you  start  using  the 
KarhiaPro  machine.  Knowledge  of  the  instruc-
tions helps protect you against dangerous situ-
ations and helps you use the machine correctly. 
Keep  the  instructions  for  future  reference.  If 
you  give  the  machine  to  someone  else,  give 
them the instructions, too.  

2.2. Intended use  

The KarhiaPro should only be used for stripping 
wire-coated dogs. The machine has been devel-
oped  for  professional  groomers.  When  the 
safety instructions are followed, the machine is 
suitable for home use.  

2.3. Operating environment  

The KarhiaPro can be used in a normal groom-
ing shop environment or at home. The permit-
ted operating temperature is b5° and 
+35° Celsius.  

2.4.Safety instructions  

Do  not  allow  the  machine,  hose,  adapter, 
KarhiaTube  container  or  transformer  to  get 
wet. If any of these parts comes into contact 
with  water  or  any  other  liquid,  disconnect  it 
from  the  mains  immediately.  Send  the  ma-
chine  (or  the  wet  part)  to  the  manufacturer 
for  inspection  before  attempting  to  use  it 
again.  

The  machine  may  not  be  connected  to  any 
power  source  other  than  the  power  source 
supplied with the device. If the power supply 
breaks  down  after  the  warranty  period,  you 
can buy a new one in the Karhia online store.  

Do not use the machine in the bath or show-
er.  

Do not allow the machine to fall into water or 
other liquids  

Do not store the machine in a place where it 
may fall into water or other liquids.  

Do not open the housing of the machine.  

Turn  the  device  o

  and  disconnect  the  plug 

from  the  mains  while  you  are  cleaning  or 
maintaining it.  

Never  leave  a  turned  on  electrical  device 
unattended.  

Unplug the machine from the mains immedi-
ately after use.  

Unplug  the  machine  from  the  mains  before 
cleaning or removing and replacing parts.  

Do not allow the machine to be used by chil-
dren or persons with limited physical or 

mental ability.  

Use the machine only for the purposes stated 
in the instructions.  

Do  not  use  the  machine  without  the  hood 
and comb attachment.  

Do not use the machine if any part is broken 
or damaged.  

If the sound level or vibration of the machine 
changes  unexpectedly  and  signi

cantly,  do 

not use the machine.  

Dispose of an unusable machine or a part of 
it in accordance with o

cial regulations.  

Do not leave the machine or parts of it on a 
hot surface.  

Do not drop or insert anything into the slots 
on the machine.  

The  machine  turns  o

  if  something  larger 

than usual is placed in the slots.  

Nothing may be placed on the hose. Do not 
step on it.  

The  machine  may  not  be  used  without  suc-
tion (suction attachment), as hairs might clog 

up the machine, or the machine might over-
heat.  

If you notice that the machine engine or belt 
package  has  heated  up  considerably,  stop 
using  the  machine.  Wait  5  minutes  before 
touching the belt package.  

Karhia Pro User Manual 1.1

 5

Copyright Karhia Innovations Oy 2018

Summary of Contents for KarhiaPro v 1.0













Reviews: