manualshive.com logo in svg

Karl Storz 205352 20-1, Service Manual

The Karl Storz 205352 20-1 is a high-quality medical instrument that offers precision and reliability. For easy maintenance and troubleshooting, a comprehensive Service Manual is available for free download on our website. Ensure optimal performance of your device by obtaining the manual from 88.208.23.73:8080, the go-to destination for user manuals.

Share
Download
background image

0. General 

Thank you for your expression of confidence in the KARL STORZ brand name. Like all of our other
products, this product is the result of years of experience and great care in manufacture. You and your
orga nization have decided in favor of a modern, high-quality piece of equipment from KARL STORZ.

KARL STORZ instruments and equipment are for use only by qualified medical personnel who are
trained in their use. All electrical installations at the location of use should meet applicable national and
local electrical codes.

Refer servicing to duly authorized KARL STORZ service personnel. Always use genuine replacement
parts from KARL STORZ. To determine which replacement parts are required please refer to the
enclosed replacement parts list. Repair and calibration of this device requires special tools and gauges;
certain internal adjustments must not be altered.

For further information, please consult this service manual or contact:

KARL STORZ GmbH & Co. KG

Karl Storz Endoscopy-America, Inc.

Mittelstrasse 8, 78532 Tuttlingen

600 Corporate Pointe

PO Box 230, 78503 Tuttlingen

Culver City, CA 90230-7600

Germany

USA

Phone:

+49 (0)7461 708-0

Phone:

+1 310 338-8100

Fax:

+49 (0)7461 708-105

+1 800 421-0837

E-Mail:

info@karlstorz.de

Fax:

+1 310 410-55 27

Web:

www.karlstorz.com

and ask for Technical Services.

Warranty 

All KARL STORZ instruments and equipment are warranted to be free from defects in workmanship and
materials for two (2) years from date of sale, unless otherwise specified; any instruments or equipment
with such defects during the applicable warranty period will be promptly repaired or replaced at no
charge to the customer.

KARL STORZ shall not be liable, expressly or implicitly, for:

• Any damages which might arise or be caused, whether by the customer or by any of the users of the

instrument or equipment, as a result of:
– misuse, mishandling, and/or improper operation,
– repairs, modifications and/or alterations performed other than by KARL STORZ or a KARL STORZ

authorized repair facility, or

– use in combination with adaptors and/or equipment, or use in any manner or medical procedure,

other than those for which it is designed; and

• Any special, indirect and/or consequential damages of any kind and however caused arising from the

sale or use of the instrument and/or equipment.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED, AND/OR STATUTORY,
INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, FITNESS, AND/OR OF
SUITABILITY FOR A PARTICULAR PURPOSE, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON
KARL STORZ’S PART.

KARL STORZ neither assumes nor authorizes any person to assume for it any other liabilities in
connection with the sale of said instrument and equipment. To insure proper use, handling, and care of
instruments and equipment, consult the applicable product literature, catalog, brochure, instruction
manual, teaching film and other materials which are included with the product and/or otherwise available
from KARL STORZ, at no charge, upon request.

12.06 / V1.0

0-3

AUTOCON

®

II 400

MODEL 205352 20-1

Summary of Contents for 205352 20-1













































































































































































































Reviews:

No comments

Related manuals for 205352 20-1

Canta V5 Quick Manual preview
V5
Brand: Canta Pages: 2
SALUDA MEDICAL Evoke Clinical Manual preview
Evoke
Brand: SALUDA MEDICAL Pages: 61
CAMAG ADC 2 Manual preview
ADC 2
Brand: CAMAG Pages: 40
Yetter 5000 SERIES Operator'S Manual preview
5000 SERIES
Brand: Yetter Pages: 24
Yetter 5000 SERIES Owner'S Manual & Parts List preview
5000 SERIES
Brand: Yetter Pages: 32
Zennio KLIC-DI Installation Notes preview
KLIC-DI
Brand: Zennio Pages: 3
Varimixer ERGO60 Operating Instructions Manual preview
ERGO60
Brand: Varimixer Pages: 28
Phenix Technologies BK130 User Manual preview
BK130
Brand: Phenix Technologies Pages: 39
Triton ARGO G60 Installation Manual preview
ARGO G60
Brand: Triton Pages: 31
Cooper Surgical Wallach UltraFreeze Instructions For Use preview
Wallach UltraFreeze
Brand: Cooper Surgical Pages: 4
Cameo AURO SPOT CLAS100 User Manual preview
AURO SPOT CLAS100
Brand: Cameo Pages: 60
GSi ARIEDO HDC 300W Installation Manual preview
ARIEDO HDC 300W
Brand: GSi Pages: 28
Nippon Genetics FastGene NG040 Instruction Manual preview
FastGene NG040
Brand: Nippon Genetics Pages: 14
Hanna Instruments Groline HI981412 Instruction Manual preview
Groline HI981412
Brand: Hanna Instruments Pages: 44
M&R Sportsman EXG 14/12 Manual preview
Sportsman EXG 14/12
Brand: M&R Pages: 98
siat SM446 HS Instruction Manual And Spare Parts List preview
SM446 HS
Brand: siat Pages: 102
Unitech DNYS-2C Operating Manual preview
DNYS-2C
Brand: Unitech Pages: 37
Walimex Pro LED Niova 150-F Pro 150W Bi Color Manual preview
LED Niova 150-F Pro 150W Bi Color
Brand: Walimex Pro Pages: 56

Brands by name

Popular brands

Load more brands