64
Hinweise zur
elektromagnetischen
Verträglichkeit (EMV)
Information on
electromagnetic
compatibility (EMC)
ƃƚƐƗƐƝƘƯ
Ɵƞ
ƭƛƕƚƢƠƞƜƐƓƝƘƢƝƞƙ
ơƞƒƜƕơƢƘƜƞơƢƘ
(
ƍżƁ
)
Table 6
Recommended separation distances between portable and mobile RF communications equipment and
the IMAGE1
|
S
The IMAGE1
|
S is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or user of the
IMAGE1
|
S can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the IMAGE1
|
S as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output power
of transmitter
[W]
Separation distance d [m]
as a function of the transmitter frequency
150 kHz to < 80 MHz
f
80 MHz to < 800 MHz
f
800 MHz to 2.5 GHz
h
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the recommended separation distance D in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
1
NOTE:
At 80 MHz and 800 MHz, the separation distance for higher frequency range applies.
1
NOTE:
These guidelines may not apply in all situations. The propagation of electromagnetic quantities is affected by absorptions and reflections of
structures, objects and people.
