Charging time is approx. 90 minutes to 2 hours.
Fit the Visio Light around the neck of your pet. To do this, measure the neck’s
circumference. Place the tape-measure around the animal’s neck and check its
circumference so that the tube will not be too tight a fit, and you can easily insert
two fingers between the neck and tape-measure. In this way, you can be sure the
Visio Light will fit exactly right.
Pass the appropriate length up to the Visio Light and cut it off behind a LED with a
sharp pair of scissors: refer to fig. 3. Replace the cap back on the tube: refer to fig. 4.
Your Visio Light is now completely ready for use. You can set it for various light modes
using the rocker-switch.
1. Continuous light
2. Rapidly-flashing light
3. Slowly-flashing light
Note that the light will last for around 90 minutes when in continuous mode, and
around 2 hours when flashing, before you will need to recharge the Visio Light.
Care of the Visio Light:
Wipe the illumination tube using a soft, dry cloth.
Hazards for children and a wider circle of people:
These appliances are not intended for use by certain people, including children,
with limited physical, sensory or mental abilities, or who lack experience and/or
knowledge, unless they are accompanied by a person who will be keep an eye on
them and be responsible for their safety, or if they have received guidance from that
person on how to use the appliance. You must keep children under supervision to
ensure they do not play with the appliance.
Keep children away from packaging material. There is a risk of choking if swallowed.
Ensure that the packaging cover is not pulled over the head.
Risk of injury or material damage:
Shield the appliance from heat.
Maximum ambient temperature is -10°/ +40°C.
Protect the appliance against physical insults such as impacts or dropping.
Do not use scratching or abrasive cleaning materials that could damage the upper
surface of the appliance. Check the condition of the appliance before use. Never use
a faulty appliance.
Electricity hazard:
