27
5. Adjust the seat plate, backrest, stroller handle, strut tubes, and seat plate
bracket to the desired width on that side.
6. Reverse steps 3-4 to mount back all the parts.
7. Repeat steps 3-6 on the other side.
8. Reverse steps 1-2 to mount back all the parts.
Caution
The adjustment on each side of the chair should be equal.
Note
The seat width can be adjusted in 1
”
increment (1/2
”
on each
side).
Seat Depth
⚫
Adjust to 280-380 mm (11" -15") seat depth (with 3cm backrest cushion)
1. Remove the screw (A) and loosen the screws (B) on each side of the seat
rail.
2. Slide the backrest along the seat rail to the desired position using preset
holes.
3. Mount back all the parts in step 1.
G
F
Summary of Contents for Flexx Adapt
Page 1: ...User manual Flexx Adapt...
Page 2: ......
Page 50: ...44 1 Loosen the screw D 2 Move the lower strap to the desired position 3 Tighten the screw D D...
Page 79: ......