12
⚫
When tilting, the total length of the wheelchair will become
longer. Make sure there is sufficient space to propel the
wheelchair.
⚫
The user should keep the head in an upright position when
the backrest is reclined, and/or the seat is tilted. The
wheelchair must always be equipped with a headrest.
8.5 Backrest
There are two types of backrests available: angle-adjustable backrest and
reclining backrest. Each of them can add on a dynamic backrest.
The
angle-adjustable backrest
has a threaded tube behind the backrest for
angle adjustment from 0° to 20°.
The
reclining backrest (optional)
has a gas strut behind the backrest. The
reclining angle ranges from 0° to 40°.
Angle-adjustable backrest
Reclining backrest
To recline the backrest, pull the orange lever (A) marked with the symbol (B)
on the right-hand side to recline the backrest to the desired angle. Then
release the lever.
Summary of Contents for Flexx Adapt
Page 1: ...User manual Flexx Adapt...
Page 2: ......
Page 50: ...44 1 Loosen the screw D 2 Move the lower strap to the desired position 3 Tighten the screw D D...
Page 79: ......