11
FUNCTIONS
1.
CH A VOLUME CONTROL
Use it to adjust the volume of CH A
2.
CHANNEL A RF LED
Led indicating the correct connection
between the receiver and the related
microphone of CH A
3.
POWER LED
It lights up to indicate that the receiver has
been correctly turned on.
4.
CHANNEL B RF LED
Led that signals the coupling between the
receiving base and the relative microphone
of channel B
5.
CH B VOLUME CONTROL
Use it to adjust the volume of CH B
6.
ON / OFF BUTTON
Use it to switch on the product.
The related led will light on.
7.
AUDIO OUT
This pre-amplified mixed output (A+B) can be
connected to the microphone input of your
mixer or amplified speaker.
8.
DC 5V POWER SUPPLY SOCKET
Connect here the included power adaptor.
The product can be powered from any 5V
USB socket.
9.
ANTENNAS
Use and adjust them to improve reception.
Note: the wireless microphone is supplied with
one of the frequency pairs indicated at the bottom
of this page.
TECHNICAL SPECIFICATIONS
AVAILABLE FREQUENCY PAIRS
Receiver’s power supply
5V
(via included power adaptor or USB socket)
Power adaptor input: 100V- 240V ~ 50-60 Hz 0,2A max
Power adaptor output: 5V
500mA
Operating range
50 m
Channels
2
Frequency band
UHF (5 frequency pairs available)
Sensitivity
-96 dbm
Frequency reponse
30Hz - 20 KHz
Receiver’s output impedance
600 Ohms
Transmitter’s power output
10dbm
Transmitters’ power supply
2 x AA 1,5V batteries (not included)
Dimensions
210 x 37 x 155 mm (receiver)
Weight
1,2 kg
CH A
CH B
1)
679,10 Mhz
663,10 Mhz
2)
682,30 Mhz
666,10 Mhz
3)
685,20 Mhz
669,10 Mhz
4)
688,30 Mhz
672,10 Mhz
5)
690,80 Mhz
675,20 Mhz
