Karma SET 6080, Instruction Manual

9

8

1.  Please be sure that the batteries in the transmitter are charged 

and if necessary replace them following the instructions. 
If you have a handy microphone unscrew the lower part to open the battery 

compartment,  where  you  can  put  2 AA  batteries  (not  included).   The  same 

batteries can be inserted in the headset version, by opening the front cover. 
Be careful to respect the indicated polarities and remove the batteries from the 
devices if you won’t use it for a long time.

2. 

If you need to connect the receiver to a mixer or an amplifier, use the unbalanced 

socket (7) and a cable with jack 6,3 mono connector.

3.  Connect the included adapter to the back socket (8) and then to the 230V 

mains.

4.  After turning on the other fixtures of your audio system, press the on/off button 

(6) on the base.

5. 

If you own the headset version connect the microphone to socket (14). Use the 

on/off button (11). Warning: the switch (11) has 3 positions:  OFF, MUTE and 
ON.  Be sure to make two steps and to position it on “ON”.  The transmitter can 
be fastened to your belt thanks to the clip, allowing you to operate handfree.  
The headset microphone can be worn behind the neck so that the microphone 
will be in front of your mouth. Be careful not to bend the antennas or hide them, 
as this could reduce the operative range.

6.  In the same way, if you own a handy transmitter, press the on/off button (11).  

For a while the led (10) will light on to confirm it is working correctly. Warning: 

the switch (11) has 3 positions:  OFF, MUTE and ON.  Be sure to make two 
steps and to position it on “ON”.

Operating Instructions