25
CAUTION:
●
You must make sure that the axle is fully located in the wheelchair bracket
and that the ball bearings are fully open and have positively attached the
wheel in the frame.
●
The rear wheel can be mounted at different positions on the frame to
alter the seat height and overall stability of the chair. Changing the wheel
position should be carried out by your approved repairer or therapist.
●
Do keep the axle clean and lubricated with light oil or maintenance spray.
●
If pneumatic tires are fitted, please maintain them at the correct tire
pressure.
●
When the wheelchair is occupied, DO NOT try to remove the rear wheel
even when anti-tippers are equipped.
4.14 Transferring In
4.14.1 Engage both manual parking brakes.
4.14.2 Turn the footplates up and swing them to the side.
4.14.3 Lower the user into the seat, allowing them to use the armrests for
support.
4.14.4 Turn the footplates back down, so that the user can place his feet on
them.
CAUTION:
●
Always ensure that the front casters are in line with the rear wheels and
pointing forwards and that the back of the chair is secure either against a
wall or firmly held by an attendant.
4.15 Transferring Out
4.15.1 Sideways transfer.
This approach is appropriate for users with sufficient torso strength.
4.15.1.1 Flip back your armrest, and make sure that the chair is near your
final destination.
4. 15.1.2 Prop up your body and move sideward slowly, using transfer board.
Be careful not to hit the brake or other components of wheelchair.
4.15.2 Front transfer
This approach is appropriate for users who are more or less able to stand
Summary of Contents for VIP 2-T
Page 1: ...Manual Wheelchair Owner s Manual VIP2 Series VIP 2 T VIP2 TR...
Page 2: ......
Page 51: ......
Page 52: ...110400000688 Rev 02 2018 04...
