12
Table 4.1 Swing-Away & Detachable Footrest Assembly Part List
No
Part
Quantity
1
Swing-Away &
Detachable Footrest
2
2
Tube-in-Centre Footplate
2
3
M6 Bolt
2
4
M6 Nut
2
5
Calf Strap
2
4.1.3 Unfolding
While unfolding the VIP 2, follow these instructions as listed below:
4.1.3.1 Stand at the side of the wheelchair as you prefer, hold the armrests
and pull outwards. (See Figure 4.7)
4.1.3.2 Pull the push handles upward and make joint be clamped (See Figure
4.8)
4.1.3.3 Put your hands on side panels and pull them outward (See Figure
4.9)
4.1.3.4 Put your two hands on the seat pan and push down until the seat is
fully lowered, be careful not to get your fingers caught. Make sure
the frame is firmly seated in its holder (See Figure 4.10)
4.1.3.5 Make lateral support bar be fixed by pushing downward. (See Figure
4.11)
4.1.3.6 Install the footrests. (See Figure 4.12)
4.1.3.7 Flip the footplates down. (See Figure 4.13)
4.1.3.8 Place the back and seat cushion on the wheelchair.
4.1.3.9 Ready to use!
Summary of Contents for VIP2 Series
Page 1: ...Manual Wheelchair Owner s Manual VIP2 Series VIP 2 T VIP2 TR...
Page 2: ......
Page 51: ......
Page 52: ...110400000688 Rev 02 2018 04...