16
Please follow below instruction to adjust headrest
4.3.1 Use #3 Allen key to loosen the hex socket head screw on fixation ring,
adjust the fixation height of rod and lateral direction angle. (See Figure
4.25)
4.3.2 Assemble the headrest assembly to clamp ring by pin-hole positioning,
tighten by using the lever of ratchet bolt (See Figure 4.26)
4.3.3 Remove rubber cap and use #5 Allen key to loosen screws, can adjust
headrest linkages. Loosen the screw that the nearest headrest pad to
adjust the headrest pad fitting. (See Figure 4.27、Figure 4.28)
4.3.4 Use #5 Allen key to loosen hex socket head screw near the upper ball
head, adjust the fitting of the headrest pad. The adjustable curved
headrest can change left/right pad support angle. (See Figure 4.29)
4.3.5 Unzip the cover upholstery, use #5 Allen key to loosen hex socket screw
of hinge near the left/right pad, can adjust the pad rotation angle. (See
Figure 4.30, 4.31)
Figure 4.25
Figure 4.26
Figure 4.27
Figure 4.28
Figure 4.29
Figure 4.30
Figure 4.31
4.4 Detachable Armrest Adjustment
4.4.1 Height-adjustable armrest
4.4.1.1 Use #5 Allen key and #13 wrench to adjust height (4 positions) (See
Summary of Contents for VIP2 Series
Page 1: ...Manual Wheelchair Owner s Manual VIP2 Series VIP 2 T VIP2 TR...
Page 2: ......
Page 51: ......
Page 52: ...110400000688 Rev 02 2018 04...