Karman KM-TV10, User Manual

SAFETY TIPS

Anti-tippers

Anti-tippers will prevent the wheelchair from tipping over backward. 
Antitip tubes are available from your local supplier.  Karman 
recommends antitip tubes be used at all times on these wheelchair 
models. 

Footrests

To install the foot rest, be sure the diagonally sliced area between the 
axle and the nut is lined up before it is insert into the frame.  Push the 
axle into the frame until a desirable length and then tighten the bolt to 
secure the foot rest.  Put on the foot rest strap when both foot rests are 
secured, and be sure the cut out space at the ends of the strap is placed 
right where the bars cross.

Never stand on the footrests, for the chair may tip forward.

Warning:

Opening and Folding the Wheelchair

Do not place your fingers between the seat sling and frame rail when 
opening or folding the wheelchair.

Check Tire Pressure

 (For Pneumatic Tires)

Tire pressure is critical to wheel lock effectiveness.  Check tire weekly 
for proper inflation level.

Quick-Release Axles 

(For KM-8020Q)

1. To install the quick release wheel, simply insert the axle into the 
    center of the rear wheel and then place  the plastic cap (The cap is 
    optional).  Make sure 

the quick release button and hand rim are 

    facing outward

.