8
4. OPERATION
4.1 Preparing For Use
4.1.1 Unfolding
Holding the armrests, pull outwards. (See Figure 4.1)
Pointing your fingers inward with the palm of your hand on the frame, push down
until the seat is fully lowered. Make sure the frame is firmly seated in its holder.
(See Figure 4.2)
Connect the hook and loop fabric on the bottom of the backrest upholstery to the
underside of the seat. (See Figure 4.3)
Squeeze the swing-away footrest release handle and insert it into its coupling at
45° on either side. Swing the footrest towards the middle until you hear it click
into place. (See Figure 4.4)
Flip the footplates down. (See Figure 4.5)
Ready for action! (See Figure 4.6)
Alternatively, you can stand at the side of the chair and complete step 1 by pulling
the nearest armrest towards you and pushing the other one away.
Figure 4.1
Figure 4.2
Figure 4.3
Figure 4.4
Figure 4.5
Figure 4.6
CAUTION:
When unfolding, please be sure the seat tube rests in the bracket (see right
picture below). Do not put your fingers between the seat tube and the bracket
to avoid injury to yourself and damage to the wheelchair (see rightmost picture
below).
Summary of Contents for S-Ergo 300 Series
Page 1: ...S Ergo 300 series S Ergo 300G KM 3020 2 S Ergo 305 KM 3520 2...
Page 2: ......
Page 34: ......
Page 35: ...104 40101 Rev 01 Sep 2008...
