41
TYRES & RIMS
Mounting the tyres
4.4.2 Spare Tyre Replacement
General
Clean the contact points on the tyre and the hub.
Pretighten the wheel bolts. Bring the vehicle to
the original position by using the jack. Tighten
the bolts as shown in the figure.
Access
4.4.1 Spare Tyre
Spare tyre is located in the rear luggage
compartment.
WARNING
• Spare tyre must be ready to use. Please
check its pressure regularly.
• In case of using the spare tyre,repair the
other damaged tyre as soon as possible.
And keep the spare tyre as ready to use.
WARNING
1. Contact surfaces on the wheel and hub
must be cleaned well before mounting
operation.
2. Lift the wheel and place it on the hub.
3. Install the wheel bolts and tighten hand-
tight.
4. Using the lug wrench, tighten crosswise
until all bolts are snug.
5. Lower the vehicle to the ground and
alternately tighten the bolts crosswise
to
180 Nm (steel rims) / 210 Nm
(aluminum rims)
.
Summary of Contents for Jest Euro VI
