48
EMERGENCY
They are located behind of the vehicle in the
trunk.
Application points are located behind the front
tyres and the front side of the rear tyres.They
are symmetrically located.
1. Place the vehicle ona plane surface.
2. Discharge all the staff inside the vehicle.
3. Get the lifting jack.
4. Place it from the mentioned lifting points.
5. Lift the vehicle
6. Put the lifting jack back to its original place
after the lifting process is completed.
5.6 Lifting Jack and Set of Tools
Access
Lifting Jack Application Points
Usage
Lifting the Vehicle
WARNING
• Maximum load capacity of the jack is
1300 kg. It should not be exceeded.
• See the lifting jack user manual
WARNING
• Do not lay under the vehicle when it is
lifted.
• Prior to lifting,stop the engine.
• Do not shock or shake the vehicle while
it is in lifted position.
WARNING
• Only use the above mentioned points to
lift the vehicle.
• To lift the vehicle from another point will
damage the vehicle.
• Prior to the lifting process,discharge the
vehicle completely.
Summary of Contents for Jest Euro VI
