54
MAINTENANCE
To protect the cooling water and the engine
against corrosion, add anti-freeze with the
predetermined quantity by KARSAN.
• Prior to adding cooling water,stop the engine
and wait till it cools down.
•
Open the filling tank cover and full the tank
till it runs over.
• Before closing the tank cover,run the engine
for 5 minutes.
• At the end of this period,if there is a lack of
water in the tank,add some till it runs over.
6.3 Engine Cooling Water
Anti-Freeze Addition
Use of Anti-Freeze
Filling-Desecrating Process
WARNING
Do not open the anti-freeze tank,while the
engine is running. The hot water vapor may
cause serious injuries.
INFORMATION
In normal conditions as a cooling water mix
%50 antifreeze and %50 pure water.
Additionally, antifreeze mixture content may
change geographically.
Thus,to learn the proper content, ask to a
KARSAN service station.
Windshield water tank is located inside of the
front lid. To reach the tank open the front lid first.
Check the level prior to start the engine. If the
water level is low,add enough quantity of water.
6.4 Windshield Water Tank
Access
WARNING
You may add some quantity of antifreeze to
your window cleaning water according to your
geographical position.
Summary of Contents for Jest Euro VI
