background image

2 / 2

Single-cable Feed System

www.kathrein.com | sat@kathrein.de

KATHREIN SE, Anton-Kathrein-Str. 1-3, 83022 Rosenheim, Germany, Phone +49 8031 184-0, Fax +49 8031 184-52360

936.5393/a/STD/0418/GB |Subject to change.

Aligning the Satellite Reception System

To align the Kathrein Euroline satellite reception system, see the assembly instructions included in the scope of delivery of the para-
bolic antenna. If using satellite reception systems from other manufacturers, see the provided product documentation to align the 
satellite reception system.

Technical Data

Type

Unit

KEL 4124

Order number

20110031

Suitable for parabolic antennas

KEA 650W/G/R, KEA 750W/G/R, KEA 850W/G/R, KEA 1000W/G/R

Input frequency

GHz

10.70 – 11.70 and 11.70 – 12.75

Output frequency

MHz

950 – 2150

Oscillator frequency (L. O.)

GHz

10.4

Frequency Allocation

MHz

UB 1: 975, UB 2: 1025, UB 3: 1075, UB 4: 1125, ..., UB 24: 2125

Polarisation decoupling

dB

min. 22

Output/impedance

-/Ω

1 x F socket /75

Supply voltage LNB

V

11 – 19

Power consumption LNB

mA

max. 300

Feed fixture dimension (

Ø

)

mm

40

Dimensions with cap

mm

121 x 70 x 91

Approx. weight

kg/unit

0.195

Warranty Conditions

•  The warranty only covers replacement of the product.

•  The LNB must be installed by qualified personnel in compliance with the enclosed instructions.

•  Do not modify the LNB, e.g. by drilling.

•  Do not cause any mechanical damage to the LNB, e.g. due deformations caused by falling from a roof.

•  Do not cause any chemical damage to the LNB, e.g. due to exposure to solvents, lacquers, detergents or the like.

•  Furthermore, the warranty does not apply to damage caused by force majeure, e. g. lightning, storm or hail.

•  Only the original invoice is acceptable for warranty claims.

Repair and Replacement

If, contrary to expectation, you should have any problems with Kathrein Euroline quality products, please contact your specialist 
dealer or our service centre. The address of our service centre is:

Rep and More GmbH

Hauptstr. 2a 
35792 Löhnberg-Obershausen, Germany
Phone: +49 6477 6123-101 
Fax: +49 6477 6123-020
Email: 

service-kathrein@repandmore.com

Disposal

Electronic equipment is not domestic waste – in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT 
AND THE COUNCIL dated 27th January 2003 concerning used electrical and electronic appliances, it must be disposed of 
properly. At the end of its service life, take this unit for disposal at a designated public collection point.

KEL 4124 

20110031

Summary of Contents for Euroline KEL 4124






Reviews: