background image

PRODUCT INSTALLATION GUIDE

KARTNERS.COM   1.877.490.3537   604.628.0567

V2_03/23

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical furnishing, basic precautions should always be followed, including the following:

Read all instructions before using (this furnishing).

DANGER – To reduce the risk of electric shock:

1. Always unplug this furnishing from the electrical outlet before cleaning or servicing.

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Unplug from outlet before putting on or taking off parts.

2. Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled 

persons.

3. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not 

recommended by the manufacturer.

4. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been 

dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and 

repair.

5. Keep the cord away from heated surfaces.

6. Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the 

like.

7. Never drop or insert any object into any opening.

8. Do not use outdoors.

9. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

10. To disconnect, turn all controls to the off position, then remove plug from outlet.

11. Mount furnishings at the correct height.

DANGER - RISK OF SHOCK - DISCONNECT POWER BEFORE INSTALLATION

Summary of Contents for KCM-SQ-8LD








Reviews: