OPERATING AND HANDLING
THE BRAVA POWER STRETCHER
22
4.- DISINFECTION
When disinfecting the stretcher, use products that will not damage the surface of the
materials and wipe with a cloth or something similar. If the surface to be disinfected is
greased, regreased it after disinfecting it.
All disinfectants must be used in accordance with the manufacturer’s instructions.
Do not wash the stretcher with high pressure water
, take special care with electrical
components, the circuit board housing, keypads, LEDs and motor.
Remove the batteries before washing and then dry the terminal contacts.
The manufacturer will not be held responsible for any anomaly or damage caused by
using a cleaning product that could damage the stretcher materials surfaces.
To ensure the hygiene and proper conservation of the product components, the
manufacturer recommends that they be disinfected after each use.
5. MAINTENANCE
Every two months check and lubricate the inner bearing guides, both in the lower frame
and in the upper ones.
Also check and lubricate the stretcher wheels and the hydraulic system. We recommend
that maintenance be carried out by a specialist from our company every six months.
Specifically, the hydraulic and general electric system should be serviced in case
deteriorated or worn out parts need to be replaced and to ensure that no breakdowns
can occur in the near future.
Service:
5
Date:
05/11/2012
Summary of Contents for BRAVA
