8
ENG
MIXER 5 IN 1
INSTRUCTION MANUAL
WARNING
230V ~ 50 Hz 500 WATT
Read this user manual carefully before you use the appliance and save it for future
reference.
Never immerse the motor unit in water or any other liquid, nor rinse it under the tap.
. Avoid touching the blades, especially when the blender bar is attached to the motor
unit. The blades are very sharp.
. If the blade get stuck, remove the blender bar from the motor unit before you remove
the ingredients that block the blade.
. Keep fingers, hair, clothing, and utensils away from the moving parts.
. Do not switch on the appliance when you attach or detach accessories.
. Never use a damaged hand blender. Get it checked or repaired in your local place.
. Never use an unauthorized attachment. If you use such accessories or parts, your
guarantee becomes invalid.
. This appliance is not intended for use by persons (including children) with reduced phy-
sical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervised or instruction concerning use of the appliance by a person
responsible for their safety.
. Children should be supervised to ensure that they do not play with this appliance.
. Never let the cord to touch hot surfaces or hang down where a child could grab it.
. Never blend hot oil or fat.
. Switch I for light load (Whisk accessories); switch II for heave load (hand-held blender,
chopper accessories, also can be used with whisk accessories).
. If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
. Care is needed when handling cutting blades, especially when removing the blade from
the bowl, emptying the bowl and during cleaning.
. Switch off the appliance before changing accessories or approaching parts, which
move in use.
. Caution: Ensure that the blender is switched off before removing it from the stand.
. Always disconnect the blender from the supply if it is left unattended and before assem-
bling, disassembling or cleaning;