CERTISAFE™ TANK MIXER MANUAL
4
Back to Contents
Model
Voltage
Phase
Amps
Locked
Rotor
Amps
Cord Gauge
50’ cord
100’ cord
200’ cord
2400C61
120
1
5.7
12
16
14
12
3400C61
120
1
7
18
16
14
12
3400H61
208-240
1
3.5
9
14
14
12
4400C61
120
1
9.1
40
14
12
10
4400HC61
208-240
1
4.5
20
14
14
12
8400C61
208-240
1
9.0
40
14
12
12
The Kasco CertiSafe™ Tank Mixer is part of a submerged active mixing system. It is intended for potable
water tanks (20,000 gallons and larger) to eliminate thermal stratification and ice formation, as well as
maintain residual disinfectant uniformity.
CertiSafe™ mixers are shipped prepared for use. The motor is equipped with thermal overload protection;
however, the mixing unit must be continuously submerged to ensure safe operation. It is important that
the installation provides appropriate voltage to the motor.
Operating the mixer continuously provides maximum water circulation in your tank. Optional system
controls are available from Kasco for mixer units (see page 4).
CertiSafe™ systems have a maximum operating depth of 50 feet. Effective mixing can be achieved in
deeper tanks with mounting at or above this depth.
This manual will cover the tank penetration process necessary to pass the power cable through
the tank roof during installation. Individual mount manuals contain information on additional tank
penetration and unit installation.
SYSTEM OVERVIEW
SYSTEM SPECIFICATIONS
