SM-100 CERTISAFE™ SUSPENDED MOUNT
MANUAL
852112 / 2021.1.1
8
8. Fit a flat washer (L) and then the sealing washer (M) onto
the eye bolt (J).
9.
From the tank interior, insert the eye bolt (J) with washers
(L, M) through the 3/8” hole.
10.
From the tank exterior, fit a second flat washer (L) onto the eye
bolt.
11.
Fasten the 5/16” nylon locknut (K) to the eye bolt.
12. Tighten the locknut until snug, being careful not to damage the
sealing washer.
13.
Attach the top connecting link (N) to the eye bolt.
L
M
L
K
N
Steel tank roof
Steel tank roof
J
L, M
Fig. 5
Fig. 6
Fig. 7
Repeat steps 8 through
13 for the second eye bolt
pass-through.
Back to Contents
