SM-100 CERTISAFE™ SUSPENDED MOUNT
MANUAL
852112 / 2021.1.1
9
STRETCHER ASSEMBLY
1.
Insert the end link of a short chain (H) between the mixer cage loops on one side of the cage.
2.
Secure the chain (H) with a 1/4”-20 x 3/4” shoulder screw (D), two 1/4” washers (F), and 1/4”-20 locknut (E).
3.
Repeat steps 1 and 2 for the other cage loop and short chain (H).
4. Tighten all locknuts until snug, without over-tightening.
5.
Insert one short chain loop (H) into an inner jaw slide (B) affixed to the
stretcher bar (A).
6.
Secure with 1/4”-20 x 1/2” shoulder screw (C) and locknut (E).
7.
Repeat steps 5 and 6 for the second inner jaw slide (B),
fastening the chain (H) with another shoulder screw (C)
and locknut (E).
8.
Tighten all locknuts until snug, without over-tightening.
H
D
F
F
E
H
B
A
B
H
C
E
C
E
Fig. 8
Fig. 9
Fig. 10
Back to Contents
