RGB4C5 UNIVERSAL LIGHTING
MANUAL
884103 / 2021.1.1
4
UNIVERSAL MOUNTING INSTRUCTIONS
1�
Attach the bracket (F) to the light fixture (A) by fitting the head
of the 10-32 x 1/2’’ hex screw (G) into the tabs on each side of
the fixture. Place one bracket O-ring (E), one #10 lock washer
(D), and one thumb nut (C) on each #10 screw outside the
bracket� Tighten the thumb screws on each side hand tight
only. Repeat this step for all fixtures.
Fig. 2
Fig. 3
2�
Assemble parts H, I, J, and K as shown in Figure 4 to secure
the fixture to the float and tighten until secure.
•
7/16’’ socket and wrench required.
Fig. 4
Note: Determine whether the Universal mount
bracket works better in a horizontal or vertical
configuration for your application (see next
page) before attaching the composite light
bracket to the fixture. Some configurations
require the composite light bracket to be flipped
from what is pictured here�
Back to Contents
