11
ROBUST-AIRE DIFFUSER
ASSEMBLY INSTRUCTIONS
Water Installation:
With the SureSink
tubing the diffuser is
ready to install. If you
are unsure how many
feet of tubing you will
need bring the SureSink
out with you and
connect the tubing
needed on the way
back.
Optional Step:
Once at
the desired location
thread a rope through
two of the four recovery
holes on the diffuser
base. Pull through until
the rope is at the
midway point on the
diffuser base.
Slowly lower diffuser
until it reaches the
bottom of the pond.
Once at the bottom tie
the installation rope to
a marker buoy. Doing
this will allow for easier
maintenance in the
future and also will
notify others of the
location of the diffuser.
Repeat the steps for
additional Robust-Aire
Diffuser locations.
