KA1750 Wireless Router
User Manual
16
Local IP Address
:Enter the IP address of your Router or reset it in dotted-decimal notation
(factory default: 192.168.1.1).
DHCP Server:
Enable or Disable the DHCP server. If you disable the Server, you must have
another DHCP server within your network or else you must configure the computer manually.
Start IP Address:
Specify an IP address for the DHCP Server to start with when assigning IP
addresses. 192.168.1.100 is the default start address.
End IP Address:
Specify an IP address for the DHCP Server to end with when assigning IP
addresses. 192.168.1.150 is the default end address.
Click the Save
button to save
your settings.
Note:
1)
If you change the IP Address of LAN, you must use the new IP Address to log in the
Router.
2)
If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the
DHCP server will change accordingly at the same time
，
while the Virtual Server and
DMZ Host will not take effect until they are re-configured.
