KA1750 Wireless Router
User Manual
10
5
Quick Setup of the Router
In order to use the web-based management software, it will be necessary to use
a computer that occupies the same subnet as the Router. The simplest way to do this
for many users will be to use DHCP server that is enabled by default on the
Router.please make sure the wan connection is ok.
Internet Connection Setup Wizard will guide you through a step-by-step process
to configure your router and connect to the Internet.ill guide you through a
step-by-step process to configure your router and connect to the Internet.
(1) Launch a web browser, such as Internet Explorer, and then use
http://192.168.1.1 to log on to the setting pages. Enter username “admin”and
password “admin”,then click “OK”.
(2) After log on ,you will see the following page. click next button. When
WAN connection is ok
，
please press next. When the wan connection is bad, please
check your cable.
Click
OK
Enter username ‘
admin
’
and password ‘
admin
’
