Wireless ADSL Router
USER MANUAL
16
5.3 Wireless setting
5.3.1 Basic
Option
Description
Enable
wireless
A check box that enables or disables the wireless LAN interfaces. The default is
to enable wireless communications.
Hide Access
Point
Select Hide Access Point to protect the ADSL route access point from detection
by wireless active scans. If you do not want the access point to be
automatically detected by a wireless station, this checkbox should be
deselected.
The station will not discover this access point. To connect a station to the
access point, the station must manually add this access point name in it's
wireless configuration.
In Windows XP, go to the Network>Properties function to view all of the
available access points. You can also use other software programs such as
NetStumbler to view available access points.
Clients
isolation
Enable this item if you don’t want your wireless clients to communicate with
each other.
Network name
(SSID)
Enter a name for user’s wireless network here. SSID stands for Service Set
Identifier. This name must be between 1 and 32 characters long. The default
name is
EUnetADSL
.
All wireless clients must either detect the gateway or be configured with the
correct SSID to access the Internet.
