Wireless ADSL Router
USER MANUAL
4.
Click
Apply
and you’ll see the following screen.
5.
Click Save, Now you can use LAN1 interface for IPTV and other Ethernet interface for
internet.
Note: If you want to cancel all modification that you do on the Router, please
select from “Admin
Commit/Reboot
Factory Default
Configuration
Reboot
” to restore factory default settings.
5.4.3 Reset Router
1. On the Rear Panel of the ADSL router you will find a small hole with the word "
reset
"
written below it. It's just big enough for a ball-point tip. Insert a ball-point tip into this
little hole (actually it's a reset switch) and keep the ball-point tip in there.
2. You can release the ball-point after about 5 seconds. You have then completed the
full-reset. Your ADSL router will now have its factory default settings. IP address will
be 192.168.1.1 and the subnet mask will be 255.255.255.0. User name will be admin
and password will be admin.
