TROUBLESHOOTING
Having trouble with your Kabbit? Most problems are easy to correct.
1.
Start by making sure you have a charged battery. You may wish to
leave the battery on the charger overnight to ensure a 100%
charge before troubleshooting.
2.
If your bike's motor will not engage or only engages intermittently,
double-check the cable connection where the rear wheel motor
plugs into the rest of the system. To function correctly, this
connector must be firmly and fully plugged in. If necessary, loosen
the clips holding the cable
to the frame to create additional slack
in the cable, then re-tighten the clips after the motor cable is firmly
plugged in.
3.
If you bent the derailleur hanger on your Kabbit in a fall, don't
worry. It's actually designed to fail, sparing damage to the more
expensive frame, and is inexpensive to replace for this reason. If
you need more, they are available on Kasen.com or at partner bike
shops.
4. If your bike powers up normally and shows no error messages but
will not run when you turn the pedal assist on, check to ensure the
cadence (PAS) sensor under the crank arm is plugged in.
Summary of Contents for KABBIT
Page 1: ...KABBIT OWNER S MANUAL GENERATING PURE EXCITEMENT...
Page 28: ......
