~ Accurately records steps and converts to miles (or km) and calories
~ 7 Days Memory
~ Built in Alarm Clock, Step Timer
~ 3-D Motion Sensor technology, Dual-functions LCD read-out
~ Metric & Imperial, 12/24 Hours format unit switch by user
~ Low Battery Indicator
~ Target Setting and Target Reaching Bar Indicator
**Avoid invalid step counting, 10 steps delay time. The unit display will not change or display steps until after
you have walked for more than 10 steps.
**Step counter will goes to sleep mode for energy saving when no movement is detected in 3 minutes.
We recommend that you place the unit in the pocket of your clothes or pants, or place in your bag or backpack.
The upper line of the display shows Total Steps, Daily Steps, Distance you've walked,
Calories burnt & Step timer by pressing the MODE button.
The lower line of the display shows Time mode & Memory mode.
Press "MODE" button to select the Daily Step Mode. "Step" will appear on the top of LCD.
The upper line of the display will show how many steps you have walked.
Maximum count 99,999 steps.
The lower line of the display will show the Real Time.
At the Daily Step Mode, hold "Reset" button for 2 seconds to delete the daily step data.
Daily step data will be stored automatically as memory, and the Daily step data will be reset to zero at 00:00 everyday.
At the Daily Step Mode, hold "SET" button for 2 seconds to go to the setting mode.
Setting will show as below sequentially:
12/24 hour display
TIME
Metric or Imperial
Stride
Weight
Target setting mode
Press "MODE" or "RESET" to select 12/24 hour display, press "SET" for confirm
Press "MODE" or "RESET" to adjust real time Hour, press "SET" for confirm
Press "MODE" or "RESET" to adjust real time Minute, press "SET" for confirm
Press "MODE" or "RESET" to select the Metric or Imperial system, press "SET" for confirm
Press "MODE" or "RESET" to input Stride, press "SET" for confirm
Stride setting range : 12 - 84 inch or 30 - 213 cm
Press "MODE" or "RESET" to input Weight, press "SET" for confirm
Weight setting range : 50 - 500 Lb or 20 - 227 kg
Press "MODE" or "RESET" to set Target step, press "SET" for confirm
Target setting range: 100 - 99,000 steps
You can keep pressing the "MODE" or "RESET" button for fast adjustment.
Press "MODE" button to select the Distance Mode. "Km" or "Mile" will appear on the top of the LCD.
Select the metric or imperial system at functional setting.
To delete the data, hold "Reset" button for 2 seconds.
Real time always appears on the bottom of the LCD.
Press "MODE" button to select the Calorie Mode. "Kcal" will appear on the top of the LCD.
The upper line of the display will show how many calories you have burnt
To delete the data, hold "Reset" button for 2 seconds.
Real time always appears on the bottom of the LCD.
Press "MODE" button to select the Step Timer Mode. "Min" will appear on the top of the LCD.
The upper line of the display will show how long you have walked (Min = Minutes)
Timer will stop automatically if no movement is detected and restart when movement is detected again.
To delete the data, hold "Reset" button for 2 seconds.
Real time always appears on the bottom of the LCD.
Features
Installation Method
Function Reading
Daily Step Mode
Functional Setting
Distance Mode
Calorie Mode
Step Timer Mode
RESET
SET
MODE
USB-ACTIVITY 3D
Pedometer
391820
