The following instructions will use the HTC VIVE as the standard VR headset but
the adaptable VR headsets are not limited to the HTC VIVE.
Every time after powering on the KAT Walk mini (such as
after connecting to your computer via USB or restarting
your computer), first initialize the sensor on the device
before using the device.
Sensor Initialization
For initializing the sensor, please manually rotate the
supporting rods for one round to complete the process.
Please note that since the base frame adds height to ground level, set the ground level while
on the KAT Walk mini to 0cm as you would normally but your height settings should be 18.6cm
less to compensate for the elevation.
First Use Instructions
Sensor Instructions
Tips for Room Settings of the VR Headset
The actual height from the headset to ground level is 18.6cm.
20