33
It may occur that the rotational structure gets continuously pulled towards a certain side
of the platform due to uneven ground or other reasons. If that happens, please follow the steps
below to adjust the device:
Loosen the nuts holding the
waist harness.
If the beam tends to continu-
ously turn clockwise, please
move the waist harness slightly
a
b
If the beam tends to continu-
ously turn counterclockwise,
please move the waist harness
slightly to the right.
c
11
12
Before getting off, Take
off your VR HMD and place it
on the hook at the back of
the supporting rods,pull down
the anti-slip protection straps
onto the shoe heel.
Press the silver buttons on side
of the buckle to open it.
13
Unfasten the belts and get off
the platform.
