uBreakiFix Fixture Install & Maintenance Guide
9
STEP 1
Insert system screws (A) into the following wall
elements as applicable:
standard wall panels (4 per panel)
header box (2 per 4’ segment)
cabinets (4 per)
wood end plates
STEP 2
Lay the two larger K-Wall frames onto a clean and
level floor. Ensure the part of the horizontal cross-
members with holes is facing the down towards the
floor.
STEP 3
Hand screw the leveling feet into the bottom of the
K-Wall frames until snug. (2 per 4’ segment)
STEP 5
Ensuring the edges of frames are flush, add a washer
onto the frame connection bolts, and insert the bolt
through the top hole between the frames. Once
through, use a wrench to hold the bolt and secure
with a second washer and wing nut (B).
STEP 6
Repeat step 5 with one of the holes near the midpoint
of the frames, and one of the lower holes. Repeat
until both larger frames are connected.
PREPARING THE WALL SYSTEM
Summary of Contents for asurion uBreakiFix Fixture
