22
Advanced
parameters
When a specific flux type does not seem to be easily dispensed by the unit with
the preset parameters, it is necessary to manually edit those, to optimize
accuracy and dispensing times.
Accessing the
“hidden”
advanced
parameters
Once dispensing parameters are optimized for a given flux type, they should
normally not be tampered with. That is why the menu to access those is “hidden”.
To access the “hidden” advanced parameters:
1.
Use the arrows to navigate to the Config menu.
2.
Use the arrows to select and display the Build version.
3.
Press twice on the “up” arrow and then twice on the “down” arrow.
4.
You are now in the advanced parameters menu.
The main reason to change the dispensing parameters would be when the unit
must be used with a flux that has different flowing characteristics. This is the case
when switching from a micro-bead (spherical particles) flux to a granular
(crystalline particles) flux.
