4
Installation
Congratulations on your acquisition of the XFP-01 flux dispenser, from Katanax.
Please read the following section for proper commissioning of your instrument. Do
not hesitate to contact Katanax with any question you might have with this crucial
step.
Box contents
The instrument comes with its essential accessories. In addition to optional items
you might have ordered, the box should contain:
Controller module
Dispenser module
Analytical balance with weighing plate
Flux hopper
Communication cable
Power supplies (two: one for scale, one for controller)
Rubber mat
This instruction manual
Location
The counter on which the instrument is to be used must be very stable, in order to
obtain fast and accurate weight measurements. In some industrial environments,
installing the unit on a vibration-dampening table may be necessary.
It is recommended to use the instrument from a standing position, and adjust
table height accordingly.
Leveling
In order to obtain good results, the balance must be manually levelled. Refer to
the balance instructions for this operation.
Connection
The power supplies of the XFP-01 accept 100-240 VAC, 50/60 Hz connections.
