Installation manual antennas
39
Modifications, misprints and errors excepted
English
5. Installation
Wall/mast clamp for install RFID antennas and RRU4/ARU4 readers (up to 6.0 kg total weight).
Mounting plate with variours pre-drilled holes suitable for Wide range antennas ect.
Order number:
52010128
Max. load-bearing capacity
kg
6,0
Adjustment range
°
± 30
± 30
Weight (unpacked)
kg
ca. 0,9
Dimensions of the clamp
mm
200 x 200 x 125
Dimension of the packing
mm
265 x 235 x 105
Material
Clamp: galvanised sheet stell
Screw/hose clip: stainless steel
Items supplied
Wall plate, mounting plate, mast clamp, hose clip, 8 screws M5x10,
8 shims, 4 screws M6*10
5.3.
Wall/mast clamp
Selecting the installation location:
Before drilling the holes, make sure there are no electrial cables in the wall.
Risk if fatal injury due to electric shock !
Make sure that the wall / the mast has a sufficient capacity. Use the appropriate mounting hardware (not included).
You may need to strengthen the wall of your desired mounting location or use a different masts.
Note
5.3.1.
Wall/mast clamp for RRU4/ARU4 Reader und RFID antennas
5. Installation
Figures 25: Wand-/Mastmontage 52010262
Figures 26: Wand-/Mastmontage 52010128