background image

9 / 32

CAS

06

20010005

CAS

60

20010006

Offset parabolic antennas

Re

fl

 ector made of aluminium, powder coated

Feed system support made of galvanised sheet steel, 
plastic coated

Mast clamp made of sheet steel, hot-dip galvanised

Optimal electrical data combined with very compact 
mechanical dimensions due to offset feed

Available in graphite or white

Items supplied: Re

fl

 ector, mast and feed system support, 

hexagon key (size 5)

Features

Without additional components, two universal feed 
systems to receive signals of satellites 6° (e.g. ASTRA/
EUTELSAT-HOTBIRD) or 9° apart can be mounted on 
the boom

Proper use (use for the intended purpose)

The CAS 06/CAS 60 parabolic antenna is 

intended solely for the reception of satellite signals

 and for 

use only as a domestic 

antenna

.

DIN 4131 speci

fi

 es that a domestic antenna should have no more than 6 m free mast length and a 

fi

 xed-end moment up to 1650 Nm.

It is unsuitable for mounting on structures that are liable to vibration.

Make absolutely sure that the values for the maximum load listed in the Technical Data (on the last page) are complied with. If this 
load is exceeded, parts could break away!

The CAS 06/CAS 60 parabolic antenna is designed for use with a feed system (LNB) for reception of the signals from one satellite 
position, or two feed systems for multi-feed applications for reception of the signals from two satellite positions 6° or 9° apart.

If the additional ZAS 90 multi-feed adapter plate accessory is used, the parabolic antenna is also suitable for three feed systems. 
The feed systems and instructions for their installation are not included in the scope of supply of the parabolic antenna.

Do not use the parabolic antenna for purposes other than those listed in this manual! Any use other than that 
speci

fi

 ed above will invalidate the warranty or guarantee.

In particular, 

never

• 

modify

 any of its 

components

 or

• 

fi

 t any components other

 than those expressly intended by the manufacturer for use with the antenna.

Breach of these rules may lead to the antenna no longer being suf

fi

 ciently stable and safe!

Electronic equipment is 

not household waste

 in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT 

AND THE COUNCIL dated 27

th

 January 2003 on used electrical and electronic equipment, it must be disposed of properly.

At the end of its service life, take this unit for disposal to an appropriate of

fi

 cial collection point.

Summary of Contents for CAS 06

































Reviews: