16 von 46
Product Description
Mounting
Due to the small reading range, it is not necessary to align the antenna. It can be mounted plain onto a wall or mounting
surface.
Accessories
Order number
Type
Description
Antenna cable to connect ARU 3000, ARU 8500 and RRU 4000 reader
52010174
R-AC 3 TNC-TNCR
3m, Low Loss 240 Flex, IP67
52010175
R-AC 6 TNC-TNCR
6m, Low Loss 240 Flex, IP67
52010176
R-AC 10 TNC-TNCR
10m, Low Loss 240 Flex, IP67
52010177
R-AC 15 TNC-TNCR
15m, Low Loss 240 Flex, IP67
Antenna cable to connect ARU 2400 and RRU 1400 reader
52010461
R-AC 1 TNC-FAKRA
1m, LMR 195, IP40
52010462
R-AC 3 TNC-FAKRA
3m, LMR 195, IP40
52010463
R-AC 5 TNC-FAKRA
5m, LMR 195, IP40
Antenna adapter
52010598
R-AA TNC - TNC
TNC (f) to TNC(m), right angle plug
8.2
Mid Range Antenna
The MIRA 100° was developed for applications in the area between near field and far field. Particular importance was
placed on creating a compact construction to enable integration into environments with limited space. Read ranges of
over 2 m are still possible even with dimensions of 156 x 126 mm. MiRa also offers increased selectivity at lower reading
distances compared with conventional antennas. This antenna design is therefore also suitable for use in the so-called
transition area (0 – 1m) with a variety of transponder types.
The S-MiRa antenna is optimised for the range 0-1 m and can also be used excellently in highly reflective areas (e.g. in
machines or in metal construction).
The typical area of application for the Mid Range antennas is in logistics, where the antennas are used for the detection
of containers on conveyor belts. In addition, the antenna can be used for access systems because, despite its small
dimensions, it can cover a reading zone of up to 2m. If the installation space for antennas is limited, the MiRa antenna
can also be chosen for gate applications.
