6 von 46
Professional Installation Guidelines for the U.S.
5
Professional Installation Guidelines for the U.S.
5.1
Installation Personnel
UHF RFID readers require professional installation!
►
You must be a professional installer with RF and related knowledge of regularizations.
►
The installation requires trained professionals to access and setup the system.
►
The system has to be installed by professional installation personnel only. Other users shall not
attempt to install the device or change the settings.
5.2
External Antennas
►
You must follow Part 15 of the FCC rules, specifically Part 15.203 pertaining antenna requirements
of an intentional radiator.
►
Make sure to use a antenna with a gain of 13 dBi or less.
►
Only use antennas which have been approved by the applicant. The use of none-approved anten-
na(s) may produce unwanted spurious emissions or excessive RF transmitting power which may
lead to the violation of the FCC/ISED limit.
5.3
Final Output Power
WARNING
►
Carefully select the installation position.
►
Make sure that the final output power does not exceed the limit set in regularizations. The violation
of the rule could lead to serious federal penalty!
If you are not a professional installer,
STOP
►
Do not proceed any further with the installation.
►
Do not install the unit or change the settings.
