background image

49

CHANNEL (SATELLITE) SELECTION

Providing you are not in a menu, pressing the 

 button calls up the channel list. The following display 

appears:

By pressing the 

&

 buttons all channels can be selected in the sequence that they appear in the current 

channel list and its sorting. Press the 

#

 (blue) button to switch between TV and radio channels.

CHANNEL SELECTION FROM THE CHANNEL LIST

Calling this up displays the channel selection / sorting list from which you selected the last channel.
At the top right you will see the selected channel list (TV or radio channels) displayed.

Press the 

#

 (blue) button to switch between the TV and radio channel lists.

To the right of it you see the current channel list sort order as selected by you.
The channel list can show channels sorted by various selection and sorting criteria.

The cursor buttons (

) are used to navigate within the respective channel list view to select 

the desired channel. The selection of the desired channel is confi rmed by pressing the 

 button. As 

soon as the turntable has found the satellite or has reached the known position, you will now hear and 
view the currently selected channel in the small window at the top right. To exit the channel list and 

return to the TV picture, press the 

 button again, or press the 

 button.

Also pay attention to the 
bars at the bottom of the 
on-screen display! These provide 
information on what to do next.

Note:

 

A comprehensive explanation of the channel list with its detailed functions (e.g. the scan 
and sort function) can be found in the UFS 740sw operating manual.

Summary of Contents for MobiSet 2 Digital CAP 600





























































Reviews: