3 – 8
MAINTENANCE
CHANGE THE BUCKET
* Bucket pins, when struck with force, can fly out and injure nearby persons.
Make sure the area is clear of people when driving bucket pins.
* Wear protective glasses when striking a bucket pin to avoid injury to your eyes.
* Chips or other debris can fly off objects when struck. Make sure no one can be injured
by flying debris before striking any object.
Remove the Bucket
1. Place the bucket in a stable position.
2. Move the O-rings from the regular position to the
bucket boss.
3. Remove the pins of section A and B, then remove
the arm and the bucket.
Install the Bucket
1. CIean the removed pins and pin holes and apply
coat the grease to them surface.
2. Place a new bucket in a stable position as
illustrated.
3. Connect the arm into the hole A, and the link
into the hole B with pins.
4. InstaII a stopper bolt to each pin securely.
5. Adjust the bucket clearance.
6. Move the O-rings for sealing into the regular
position.
7. Lubricate each pins with grease.
8. After install the bucket, start the engine and low
speed rotate the bucket to the stroke end.
Check if anything interrupts the bucket rotation.
CAUTION
WHEN REQUIRED
(A)
(B)
Bucket
link
➄
O-ring
➁
Arm point pin
Arm point
Bucket
➀
Lock pin
➂
Lock pin
➃
Bucket link pin
➅
Washer
Movement of O-ring
Bucket boss
Summary of Contents for 17VXE
