![background image](http://html.mh-extra.com/html/kato/premium-cityrange-cr-200rf/premium-cityrange-cr-200rf_instruction-manual_657900144.webp)
- 117 -
17. Drive operation devices
D
riv
e o
pe
ra
tio
n d
evi
ces
(9) Torque converter trouble warning lamp
This lamp lights when the pressure of oil supplied to the clutch
inside the torque converter goes below or above the rated pressure
or when the oil temperature inside the torque converter rises above
the rated temperature.
If the machine is driven when pressure is below the rated pressure,
the clutch for the transmission will wear away, so stop the machine
immediately and contact your authorised KATO dealer.
If any of the problem listed below occur, stop the machine
immediately and contact your authorised KATO dealer.
・
If pressure is above the rated pressure
………………
The warning lamp lights.
(The buzzer does not sound.)
・
If pressure is below the rated pressure
………………
The warning lamp lights and the buzzer
sounds intermittently.
(
0.5 seconds intervals
)
・
If oil temperature is above the rated temperature
…
The warning lamp lights and the buzzer
sounds intermittently.
(1 second intervals)
・
If there is a problem with sensors or wiring
…………
The warning lamp flashes.
(T217161-016-0E)
(
10
)
Auxiliary brake indicator lamp
This lamp lights when the auxiliary brake lever switch is "ON".
The auxiliary brake is activated when the auxiliary brake lever is
"ON", the driving speed is at least 10km/h, and the engine speed
decreases from over 950 min
-1
down to 850 min
-1
without operating
the accelerator.
(11) Fuel level warning lamp
The capacity of the fuel tank is 250L. When the volume of
remaining fuel falls to approximately 50L, this lamp lights.
Keep a supply fuel
(diesel fuel)
available and refuel early.
Refer to "6. Precautions when filling with fuel".
・
When the warning lamp flashes at 0.5 seconds intervals, drain water from the fuel filter.
・
If there is a problem with sensors or wiring, the warning lamp flashes.
(1 second intervals)
(511A-0012-0E)
Summary of Contents for PREMIUM CITYRANGE CR-200RF
